Surveillance camera AP-DB01 with built-in rechargeable battery, WLAN, IR night vision LED, 2-way audio connection and extremely low power consumption up to 6 months runtime.
With Full HD resolution and alarm function via PIR motion detector or video motion detection
The DB-01 camera can be installed indoors or outdoors, independent of power supply and network connection and without the hassle of laying cables. The practical magnetic holder also allows the surveillance camera to be quickly moved to another location.
The surveillance camera with battery allows audio communication in both directions thanks to the built-in microphone and loudspeaker. In this way, the camera also serves as an intercom system.
Suitable for outdoor use
Thanks to its IP65 rating, the camera can be used both indoors and outdoors without hesitation. So there are no restrictions when using it indoors or outdoors to monitor the garden, driveway or front door.
Surveillance camera with battery suitable for outdoor use thanks to IP65
Different types of lighting
The surveillance camera has built-in IR night vision LEDs that still show detailed, clear video even in total darkness. As these infrared frequencies are above our visual spectrum and therefore above our colour spectrum, the video is displayed in black and white.
However, additional white light LEDs can be used to display the scene in colour at night, whereby the power consumption of these white light LEDs reduces the runtime of the built-in batteries. This white light can be switched on and off via the APP.
Alarm messages and triggering
The PIR sensor, which is located on the front of the camera, triggers an alarm and a message to your mobile phone. In addition, there is also the option of using the camera's video motion detection to define the areas to avoid false alarms and to specify exactly which areas are eligible for the alarm.
Surveillance camera with built-in battery and video motion detection to avoid false alarms
The voltage of the rechargeable batteries is maintained for approximately 1 year when the camera is not in use. Depending on the use of the camera and its functions, the batteries supplied offer a runtime of 4 - 6 months. Assuming an alarm rate of 20x per day, the batteries will provide power for a period of 3 -4 months. This is reduced by manual access to the live image, frequent use of the built-in white light LED, etc.
Accessing the camera with the APP
The APP "Vicohome" can be downloaded free of charge from Playstore (Android) and Applestore (iOS), the setup is done in a few minutes. This way you can access the live videos and also the videos recorded on the SD card from anywhere in the world and check if everything is okay at home.
Other features of the DB-01 surveillance camera with battery:
- 2.4GHz WLAN support (5GHz is not supported).
- IP65 dust and waterproof housing
- Supports human contour detection, with activity zone
- 2MP Full HD resolution with 1,920 x 1,080 pixels at 25 frames/second
- Built-in 32GB SD card
- 2 batteries 21700 included
- Plug & Play technology for easy installation
- Viewing angle about 110° horizontal
|Master Processor||SOC||HI3518E V300: A dominant frequency of 900 MHz|
|Image Sensor||Sensor||1/3" color CMOS Sensor|
|Lens||M12, f: 2.8mm, F2.0, 2-megapixel|
|Visual Angle||H (horizontal) 95 degrees; V (vertical) 55 degrees; D (diagonal) 110 degrees|
|Minimum Illumination||0.01 Lux|
|Audio||Input/Output||Two-way voice intercom available (built-in microphone and speaker)|
|Lighting Frequency||50Hz, 60Hz|
|Image Frame Rate||15 fps|
|Maximum Image Resolution||1920*1080P|
for Night Vision
|Mid-power infrared lamp (850nM in wavelength)
dual-source white-light source with an irradiation distance of 7m
|Network||Wireless Network||2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna|
|Protocols Supported||TCP/IP, UDP/IP, DHCP, RTMP, MUTP|
|AI||Intelligent Features||Human contour detection, activity zone,intelligent push, pet snapshot|
|Alarm Methods||Alarm Notification||Alarm push by mobile APP, white light flashing and alarm sound|
|Wake-up||Wake-up Method||PIR body induction wake-up, and remote positive wake-up|
|Video Recording||Recording Method||Alarm triggered recording, and manual recording|
|Video Storage||Cloud storage, local MICRO SD card, and mobile phone memory|
|Indicator Lamps||LED Indicator||RGB tri-color lamp indicating the status of power/network signal/functionality|
|Battery Life||6 months (provided that 20 10s videos are recorded per day)|
|Standby Time||1 year|
|Charging Voltage||DV 5V+-5%/1.5A|
|Charge Time||Within 8 hours|
|Protection Method||IP65 resistance to dust and water; over-current/over-discharge/over-charge/
short circuit/charging protection at high & low temperatures
|Solar Panel||USB Solar Panel optional|
|Power Consumption||Standby Power Consumption||2.4mW (3.8V 0.63mA)|
|Power Consumption of Daytime Operation||1W (3.8V 264mA)|
|Power Consumption of Operation at Night||2.23W (3.8V 588mA)|
|Interfaces||Power Supply||1 MICRO USB interface|
|SD Card||1 MICRO SD card (up to 128GB supported)|
|Keys||1 reset key and 1 on/off key|
|Installation Method||Installation Method||Magnet Bracket and 1/4 universal screw holes|
|Operating||-10°~45°C / 0%~80% (no condensation)|
|Storage||-20°C~60° / 0%~90% (no condensation)|
|Specifications||Size (LxWxH)||84mm*62mm*92.5mm (with bracket excluded)|
|Net Weight of
|Finished Weight||Approx. 570g|
|Material + Process||ABS + PC|
|Color||White with high gloss|
|Certificate||CE FCC RoHs, Battery MSDS|