The highres underwater camera IP as robust, made of stainless steel koi camera AP-W5036 is equipped with a high-resolution sensor of 5 megapixels, to display the finest details!
The ideal underwater camera for many purposes such as koi / carp pond, swimming pools, inspection camera for water reservoirs and maritime missions and for creating training videos for divers.
The camera is highly recommended for use in koi ponds, as it allows early detection of parasitic diseases with your koi.
1-cable solution for easy installation
With the aid of POE technology, only one cable is needed, which provides the supply voltage for the pond camera and also transmits the data.
A combibox, which combines the network video signal with the power supply, is located at the end of a 10 meter long cable, which connects the underwater camera IP to the box. This network cable is a custom-made, aging and hydrolysis resistant and non-stretchable.
On request, other cable lengths can be realized. For special orders an additional delivery time of about 3 weeks is to be expected.
Built-in infrared lighting
The underwater camera IP has 42 IR LEDs, which ensure a bright picture even at night. Since these IR LEDs operate in a frequency range (IR spectrum) above our visible range and also above the color spectrum, the videos are shown in black and white.
However, it should be remembered that the quality of the IR night vision recording is highly dependent on the water quality. Dirt particles in the water reflect the IR light, so that the overall impression suffers.
The use of infrared light is safe for the koi, as they use the same visible frequency range as humans. Here is just a slight, reddish glow to see. Our underwater camera with zoom lens and underwater camera with 150 ° wide angle provide built-in white light LED, if no additional spotlight is desired in the pond.
Developed for long-term use under water
The underwater camera IP W-5036 is used in water depths of up to 5 meters. It has been tested under 150Kpa of underwater pressure, which is approximately 5 meters less 100Kpa atmospheric pressure (MSL).
If the camera is used at a greater depth, then our W-2020 underwater camera with 150 ° wide-angle, which is designed for depths of up to 40 meters.
Universal camera protocol
The camera works with the standardized camera protocol ONVIF, so that the video streams can be integrated into any IP camera system, VMS or other surveillance system. This is where the use of NVR recorders offers.
If you would like a consultation, please do not hesitate to call us on 02433/964 25 80.
Live videos directly to the phone
Thanks to the P2P technology, the connection, setup and operation of the underwater camera IP is very easy. Via the free app "XMEye", which can be downloaded for Android devices in the Playstore and for iOS devices in the Apple Store, the livestreams are immediately displayed on mobile phone or tablet.
With this app you can retrieve the videos from anywhere, whether in the domestic network or over the mobile network - worldwide.
The presentation of the camera videos can also be displayed on the common browsers Chrome, IE, Firefox and Safari. The browser can also make many settings on the camera. The menu offers a wide range of settings that allow you to get the best possible image quality from the image and customize the system to your needs. At the bottom of this page you will find a selection of software that you can use for your PC.
This camera is a pure IP network camera, so has no wireless feature! In order to send the video signals over WiFi, you need a WiFi Repeater like AVM Fritz Repeater 1750E, which has a LAN input.
The camera is connected to this LAN port. The repeater in turn connects to the in-house WiFi router via Wireless.
Further features of the underwater camera IP W-5036:
The AP-W5036 is equipped with a 3.6mm lens and ensures a viewing angle of 80°.
It is important to ensure that the camera is not operated in seawater, so is not exposed to a constantly high salt content, as the corrosion resistance suffers.
The material processing of aluminum and stainless steel causes slight scratch marks on the top of the housing. These scratches are not signs of use, but traces of material processing in the production process.
Here you will find more underwater cameras.
The power adapter is included!
|Waterproof level||IP68, Resistance to water pressure: 150KPa (5 meter water depth, at MSL)|
|Camera pixels||2560*1440P Full HD SC5239 CMOS sensor , 0.1Lux F1.2|
|Intelligent alarm||Motion detection, video loss, broken Ethernet cable, IP address conflict|
|Camera Lens||6mm, angle: 54°, focus: 7 meter.||3.6mm, angle: 80°, focus: 2 meter|
|Camera material||304 stainless steel|
|Camera cable||Diameter 6.3mm, length 10 meter. Tensile, anti-aging, anti-friction, anti-sea water corrosion, special underwater wire|
|Length can be customized, up to 30 meters|
|Light||42 LED infrared light; photosensitive IC automatic control.|
|Day/Night||Auto day&night switch|
|Ethernet||RJ-45 connector (10Base-T / 100Base-TX)|
|Smart Phone||iPhone, Android|
|Operating Voltage||DC12V/POE 48V-54V IEEE.802.af Power out pin: 1,2(+)/3,6(-)|
|Weight||Equipment weight 1.2KG|
|Equipment size||90mm * 90mm * 70mm (including bracket 130mm)|
|Package Contents||Camera, CD, manual|
Please find additional documentation here: